Maxis MF60 Spezifikationen PDF herunterladen

Charging Your Device

You can charge your device by using USB cable or adapter.

1. Insert the charger lead carefully with

the plug arrow facing the bottom of

the device.

2. The plug only fits one way. Do not

use excessive force to insert the plug.

3. Make sure the plug is the right way

round and lined up correctly and

insert it gently.

Introduction

ZTE MF60 is a 3G/2G mobile hotspot device, working in GSM/GPRS/

EDGE/WCDMA/HSPA/HSPA+ network. The client devices could connect to

it via USB or Wi-Fi interface. The device supports data and SMS services,

enabling you to communicate anytime and anywhere.

This quick guide provides instructions on how to install and get started with

the product. For information about connection of services, please consult

your service provider.

ZTE CORPORATION

NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057

Tel: +86-755-26779999 URL: http://www.zte.com.cn

E-mail: [email protected]

ZTE MF60

Quick Guide

2 4 5 6 73 8

LEGAL INFORMATION

No part of this publication may be excerpted, reproduced, translated or

utilized in any form or by any means, electronic or mechanical, including

photocopying and microfilm, without the prior written permission of ZTE

Corporation.

The manual is published by ZTE Corporation. We reserve the right to make

modications on print errors or update specications without prior notice.

Version No. : R1.0

Specication

Hardware Installation

Right Side Front Left Side Bottom

Data Service

HSPA+: DL 21.6 Mbps, UL 5.76 Mbps

WCDMA CS: 64 kbps UL/DL

WCDMA PS: 384 kbps UL/DL

Interface USB and Wi-Fi

Wi-Fi Standard 802.11 b/g/n

Wi-Fi Security WEP/WPA/WPA2/WAPI

USB Version USB 2.0 HIGH SPEED

USB Interface Type Micro USB

Weight 77 g

Dimensions (W×H×D): 99.7 mm*53.7 mm*13.9 mm

microSD card Support up to 32 GB microSD card

Power Adapter 5 V/700 mA

Battery 1500 mAh

*Standby time 100 hours

*Working time 4 hours

Working Mode

Operate system

Windows 7, Windows Vista(32bit or 64bit), Windows

XP (SP2 or later), MAC (10.4 or later)

Web Browser

IE (6.0 or later), Firefox (2.0 or later), Opera (10.0 or

later), Safari (4.0 or later), Chrome (5.0 or later)

Operating temperature 0 °C ~ +35 °C

Storage temperature -20 °C ~ +50 °C

Charging temperature 0 °C ~ +45 °C

Humidity 5%~ 95%

Notes:

microSD

is a trademark of SD Card Association.

The device’s standby and working time are only for your reference, and

based on ideal working environment.

Getting to Know Your Device

The following gure shows the appearance of the device, it is only for your

reference. The actual device may be different.

Interface and Buttons

1.Power Hold the Power button to switch on/off the device.

2.Memory card slot

(microSD card)

It is where you insert the memory card (microSD card).

3.WPS

This button is used to start/end Wi-Fi Protected Setup

authentication process and enable/disable the Wi-Fi

function.

• Hold it for 3 seconds to activate the WPS function.

• When the WPS function is available, press it to

deactivate the WPS function.

• Press it to enable/disable Wi-Fi function.

4. LED Screen

It indicates the signal type, signal strength, battery, Wi-

Fi, etc.

5. External

Antenna

Connector

It is used to connect an external antenna to enhance

the signal strength.

6 . C h a r g e r / U S B

port

• Charge your device.

• Connect the client to your device via USB cable.

Notes:

• Hold the WPS and Power buttons simultaneously until the LED

screen turns off, and then release the buttons. The device will restart

automatically and restore to the factory default settings.

• Please use the original external antenna if necessary.

LED Indicator

When the device is powered on, the following icons will appear on the LED

screen, with the corresponding indicates listed in the table below:

Icon Indication

Network signal strength.

Inserting SIM Card and Battery

1. Use the thumb catch at the bottom of the device to open the battery

cover.

2. Insert the SIM card into the SIM card holder.

3. Insert the battery as shown with the contacts located against the metal

springs, and press the battery down into the case.

4. Line the battery cover up correctly and press gently to close the case.

Inserting microSD Card

1. Pull the microSD cover out of the card slot.

Notes:

Do not pull the cover rudely, as it is connected with the device.

2. Insert the microSD card into the microSD slot. The following picture

shows the correct inserting direction. You will hear a click when the

microSD card locks in place.

3. Close the microSD cover.

Switching On/Off Your Device

Hold the Power button to switch on/off the device.

Notes:

The device is powered on when the LED screen lights up.

Your device supports three working modes. For the client, we only use PC or

laptop as the example in this document.

USB Mode: Connect to the device with the USB cable.

Wi-Fi Mode: Connect to the device via Wi-Fi.

Network type. 2G or 3G icon will appear on the LED screen

according to the network being connected.

Connect to the Internet automatically.

Connect to the Internet manually.

Roaming network indication.

New message received.

Wi-Fi Status and number of the connecting users.

Battery power indication.

Establish a connection between your device and the client

Via USB Cable

• Connect your device and the client with the USB cable.

• Power on your device.

• Follow the system prompts to complete the software installation.

Notes:

• If the system does not launch installation automatically, you can run the

installation program in path of My Computer > Portable Hotspot.

• The driver of your device will be installed at the same time.

• After the installation, the system will create a shortcut icon on your

desktop and a ZTE USB Drivers for MF60 program group in the Start→

Programs menu. The connection between your device and the client will

be established successfully a moment later.

Via Wi-Fi

1. Power on your device directly. It will take 1~2 minutes to initialize.

2. Use your normal Wi-Fi application on the client to search the available

wireless network.

Mixed Mode: Connect to the device with the above two connection methods.

Notes:

If you want to connect to the Internet by using Wi-Fi mode, make sure that

the client supports the Wi-Fi function.

The following picture is the application example. All of the client devices can

surf on the Internet at the same time.

MF60_UniversalQuickGuide.indd 1 2011-4-19 9:46:15

1 2

ZTE MF60 1
Quick Guide 1

Inhaltsverzeichnis

Seite 1 - Quick Guide

Charging Your DeviceYou can charge your device by using USB cable or adapter.1. Insert the charger lead carefully with the plug arrow facing

Seite 2

10 11 12 13 14 15 16 17 18Notes: You need to check your Wireless Network Connection. Set the client to obtain an IP address automatical

Weitere Dokumente für Vernetzung Maxis MF60

Um das Dokument anzuzeigen Maxis MF60 Bedienungsanleitung

Maxis MF60 Bedienungsanleitung (4 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Maxis MF60 Spezifikationen

Stöbern Sie online oder laden Sie Spezifikationen nach Vernetzung Maxis MF60 herunter. Maxis MF60 Specifications Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Vernetzung Maxis MF60

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Maxis MF60